B-2000.2
B-2000.2 / D-2000.2 is a Stereo High power Digital Amplifier featuring 2000W per channel into a 4Ω load.
It has been designed to drive large speaker systems like Array satellites or subwoofers.
Using two independent high current switching power and Class-D amplification modules,
B2000.2 / D-2000.2 offers high power
efficiency with reduced noise and distortion.
- Built in HIGH-PERFORMANCE dsp
- Upadta with USB and adjust measure wtih a PC soft
| Model | B-2000.2 |
| Stereo Mode (both Channels Drive) | 4Ω-(RMS) 2000Wx2 |
| Input Sensitivity (Limiter Off) | 0.9-1.1V(+0/-1dBv) |
| Input Impedance | 20KΩ balanced or 10KΩ Unbalanced |
| Voltage Gain | 40(+0/-0.5dB) |
| Frequency Response | 20Hz~20KHz (0+/-1dB) (At 10dB Below Rated Output Power) |
| THD+N | <0.1% (Ref. 1K 1/8 Rated Power, A-Weighted) |
| S/N Ratio | >100dB |
| Crosstalk | >70dB |
| Damping Factor (1K8Ω) | >200 |
| Power / Output Circuitry | Switching Power-Class D |
| Power Supply | AC:110-120V or 220~240V 50/60 Hz |
| Protections | Full short circuit, open circuit, thermal, ultrasonic, and RF protection stable into reactive or mismatched loads, turn ON/OFF, muting, tried crowbar. |
| Controls | Front: AC Switch (soft-stairt), Input level control, USB Adjust - D-2000.2 only) Rear: Stereo - Parallel Selector |
| Indicators | Signal: 2 green LED - Clip: 2 red LED / Power: 2 green LED Protection: 2 red LED |
| Connectors | Input: Balanced XLR-TRS combo input jacks / Output: Speak-on jacks |
| Dimension (W x D x H) | 483 x 360 x 88mm (19.02" x 1.18" x 3.46") |
| Weight | 5.0kg(11.02 lbs) |