ZP-10Z & ZP-12A & ZP-15A

Model ZP-10A ZP-12A   ZP-15A
System type 2-way active vented loudspeaker system  
Power system Bi-Amp DSP processor,
1000W continuous RMS (Class-D LF-650W+HF-350W),
4000W peak (2600W LF+1400W HF)
Transducer low

10" (246mm),
2.5"(65mm) voice coil

 12" (296mm),
3"(76mm) voice coil
15" (367mm),
3"(76mm) voice coil 
Transducer high 1" throat compresion driver, 1.4" (35mm) voice coil
Crossover frequency 3.0KHz 2.0KHz  2.0KHz 
Max SPL (@1m) 129dB (peak), 126dB (continuous) 131dB (peak), 128dB (continuous)   134dB (peak), 131dB (continuous)
Frequency response 54Hz-20KHz (-3dB) 53Hz-20KHz (-3dB)   50Hz-20KHz (-3dB)
Frequency range 48Hz-20KHz (-10dB) 46Hz-20KHz (-10dB)   43Hz-20KHz (-10dB)
Horn coverage 90° horizontal, 60° vertical (nominal)  
DSP Preset modes

Live-music-speech-monitor

Connectors

2xXLR+1.4" (6.35MM) TRS combo inputs(line/mic);

1x3.5 stereo AUX IN; 1xXLR mix output (link);

1xIEC power cable input  

Bluetooth stereo Stereo L/R-Vol-pair-link switch (APP control)
Controls Volume control knob, AC Power switch, Line/mic toggle switch, DSP preset switch, BT apir and link switch
Indicators Signal/clip limiter LED, four DSP mode LEDs, BT pair-link LED, power switch LED
Power

Connection:IEC

Voltage:110V-120V~,220V-240V~,50/60Hz, switchable

Fuse:100V-120V T10AL AC250V, or 220V-240V T5AL AC250V Consumption:800W  

Electronic protections Electronic clip,
thermal and transducer overdrive protection  
Enclosure Trapezoidal, injection-molded, polypropylene with perforated steel grille, 2xhandles (left and right sides) Trapezoidal, injection-molded, polypropylene with perforated steel grille, 3xhandles (top and both sides)  
Mounting/installation 36mm standard pole-mount, suspended with integral M10 points, wedge monitor  
Dimensions (HxWxD) 528x332x315 mm (20.8"x13.1"x12.4") 615x364x348 mm (24.2"x14.3"x13.7")  680x421x382 mm (26.8"x16.6"x15.0") 
Weight 12.3kg (27.1 lbs) 16.3kg (35.9 lbs)  18.8kg (41.3 lbs)